simba

VN EN

Bộ Thu Quang FTTH Fullwell FWR-8610R

Mô tả

FTTH WDM OPTICAL RECEIVER
Nhà sản xuất

Fullwell
Giá

Vui lòng liên hệ
Số lượng

Xem địa chỉ mua hàng

Bộ Thu Quang FTTH Fullwell FWR-8610R

Mô tả Sản phẩm
Thông số kỹ thuật
Ứng dụng
Download (file PDF)
Ý kiến khách hàng

Thêm vào giỏ

Mô tả Sản phẩm
Thông số kỹ thuật
Ứng dụng
Download (file PDF)
Ý kiến khách hàng

Mô tả Sản phẩm

Bộ Thu Quang FTTH Fullwell FWR-8610R

Fiber to the home ( FTTH ) broadband access is the ultimate development goal, FWR-8610R optical receiver is the target terminal products for this goal. FWR-8610R device adopts technology of high isolation WDM in order to separate CATV and ONU signal. Further more, it also adopts low optical power receiving and RF-AGC control technique, which could achieve the requirement of ≤-2dBm CATV receiving for FTTH. The optical power receiving monitoring indicator LED ( ≥-15dBm ) is provided on the pane and it supports RF outputs constantly, convenience of customers use, which is the ideal receiver equipment for FTTH.

BY_Thu_Quang_1 BY_thu_quang_2

Thông số kỹ thuật

Bộ Thu Quang FTTH Fullwell FWR-8610R

Item		Unit	Performance Parameter
Optical characteristic	input wavelength	nm	1310, 1490, 1550
	output wavelength	nm	1310, 1490
	operation wavelength	nm	1540~1560
	channel separation	dB	≥40 (1310/1490nm and 1550nm)
	response	A/W	≥0,9
	receive power range	dBm	+2~-18
	reflection loss	dB	≥55
	fiber linker	/	SC/APC
RF characteristic	PON linker	/
	Bandwidth/flatness	MHz/dB	47-1000/≤±1
	output level	dBuv	AGC: 82±1/(-2~--12dBm)
	reflection loss	dB	≥14 (75Ω characteristic impedance)
	RF output interface	/	Inch (one way output)
	CNR/MER	dB	≥44/34(PAL-D 60CH, OMI 3,8%,-9dBm)
	CTB/CSO/HUM	dB	≥65/≥60/≥60(-1dBm receive )
Other requirement	power supply/consumption	V/W	External AC100~240V→DC5/5

	working/storage temperature	℃	-35~50/-40~75 ( humidity 5~90% )

	size	mm	95x92x23

BY_Thu_Quang Power Input

POWER IN: FWR-8610R is the external power supply input port, First should be the DC+5V External voltage stabilizer output line connected tothe device POWER IN, than put DC+5V external mano-stat insert 100/240V, DC+5V Face posted power light, show power pasrt is regularly working.

Optical Fiber Input

OPTICAL IN: FWR-8610R is input interface of optical signal, in optical access should clean APC TOP by alcohol, than align adapter sunken mouth, fiber mouth march link; when the light receiving power is larger than +2dBm, the yellow indicator light on, to show the optical signal is too high; when the light receiving power is less than -15dBm, the red indicator lights on, to show the optical siggnal is too small; if the light receiving power is in the range of +2~-15dBm, the green indicator lights on, to show the optical signal is receiving normally.

Install Test Matter Need Attention

FWR-8610R device is indoor type structure, Not to be used in plasce of harassment by the rain; Packed in the box of the indoor appropriate space, For cooling; the output of the cable shielding network must be grounded, Grouding resistance should be less than 4Ω, The local power supply for electrical shell has to be grounded, Above ground resistance.

Tail fiber input and output cable has to be reserved certain use, FWR-8610R device is with SC/APC.

Attachment

FWR-8610R Outlay power supply, AC100~240V DC+5V 500mA 1PCS.

Ứng dụng

Bộ Thu Quang FTTH Fullwell FWR-8610R