EDFA Module FWA-1550M

Mô tả

Booster/Pre-Amplifier EDFA Module
Nhà sản xuất

Fullwell
Giá

Vui lòng liên hệ
Số lượng

EDFA Module FWA-1550M

Mô tả Sản phẩm
Thông số kỹ thuật
Ứng dụng
Download (file PDF)
Ý kiến khách hàng

Mô tả Sản phẩm
Thông số kỹ thuật
Ứng dụng
Download (file PDF)
Ý kiến khách hàng

Mô tả Sản phẩm

EDFA Module FWA-1550M is EDFA (Erbium Doped Fiber Amplifier) is a representative one in the optical amplifier. As the EDFA’s wavelength is 1550nm, it is in line with the low-loss band of fiber and its technology has been relatively mature, so widely used.

Erbium-doped fiber is the core components of the EDFA Module FWA-1550M, it makes quartz optical fiber as matrix material, and incorporate a certain proportion of rare earth element erbium ions (Er3 +) in the core of a fiber.

When certain amount of pump light is injected into the erbium-doped fiber, Er3 + have been excited from the low-energy level to the high energy level, due to Er3 + has a very short lifespan on the high energy level, and soon transit to a higher level by the form of a non-radiative, and form the population inversion distribution between this energy level and low-energy-level. Because the energy between these two energy levels is exactly equal to the photon energy of 1550nm, stimulated emission of 1550nm light can only occur, we can only enlarge 1550nm optical signal.

EDFA Module FWA-1550M - The smart module product can be into three type:

FWA-1550MC : for Booster EDFA.
FWA-1550MG : for Pre-Amplifier.

Features:

High quality: The former-class pump commonly use 980nm, power, gain, flatness is legitimately optimized by software to minimize the NF of the EDFA, the system get excellent noise index.
Intuitive: Reliability: module adopt international standard size shell, generality without doubt.
Reliability: PCB inside adopt four layers structure, ensured large current get through.
Smart type: the model in-set CPU and the control current of APC & ATC, only need electrified +5V power, model will proper functioning.

EDFA Module FWA-1550M

FWA-1550M FWA-1550M-1

Thông số kỹ thuật

FWA-1550MC series Booster EDFA Module

Item	Unit	Parameter
Working Wavelength	nm	1535~1565
Input optical power	dBm	-9.9~+9.9
Nominal input optical power	dBm	0
NF (+0dBm,@1550nm)	dB	3.8~5.5
Gain flatness	dB	＜±0.3
Stability of optical power output	dB	＜±0.5
Polarization related loss	dB	0.38
Polarization Sensitivity	dB	＜0.2
Polarization Mode Dispersion	ps	＜0.5
Connector (IN/OUT)		FC/APC, SC/APC
Pump working No.	(N)	1~3
Light leak of pump	dBm	-35
Saturated output optical power	dBm	13∽23
Service voltage	Vdc	+3.3~5
Service current	Adc	＜3
Working temperature	℃	0~50
Measure	mm	90×70×20

FWA-1550MG series preamplifier module

Working Wavelength	nm	1535~1565
Input optical power	dBm	-32~+10
Range of gain	dB	3~33（AGC）
Largest output optical power	dBm	0~23（APC）
NF (when largest)	dB	3.8~5.5
Gain flatness	dB	＜±0.5
Polarization related loss	dB	0.38
Polarization related gain	dB	0.5
Polarization Mode Dispersion	PS	0.3
Stability of optical power output	dB	＜±0.5
Return wave loss	dB	55 (APC)
Connector (IN/OUT)		FC/APC, SC/APC
Pump working No.	N	1
Light leak of pump	dBm	-35
Service voltage	Vdc	+3.3~5
Service current	Adc	<3
Working temperature	℃	0~50
Measure	mm	90×70×20

FWA-1550MP series pulse gain module

Working Wavelength	nm	1535~1565
Input optical power	dBm	-32~-10
Range of gain	dB	3~35（AGC）
Largest output optical power	dBm	0~20
NF	dB	3.8~5.5
Gain flatness	dB	＜±1
Polarization related loss	dB	0.38
Polarization related gain	dB	0.5
Polarization Mode Dispersion	PS	0.3
Stability of optical power output	dB	＜±0.5
Return wave loss	dB	55 (APC)
Pulse repeat frequency	nS	300~5000
Pulse width	nS	200~450
Connector (IN/OUT)		FC/APC, SC/APC
Pump working No.	N	1
Light leak of pump	dBm	-35
Service voltage	Vdc	+3.3~5
Service current	Adc	<3
Working temperature	℃	0~50
Measure	mm	90×70×20