10G Media Converter BT-10GMC

  • Description
    10Gbps Media Converter SFP+/XFP Slot
  • Producer
    Fiberroad
  • Price
    Please Contact
  • Quantity
Description

10G Media Converter BT-10GMC is between SFP+ to UTP, and XFP to UTP.

No matter what kind of media applied for 10Gbps Ethernet, it used to be the fiber as the media for transmission.

10G Ethernet standalone and module cards, brings you the best and simple solution for the Ethernet conversion between media of copper wire and fiber, with the speed of 10G. 

BT-10GMC its module card allows you to cascade multiple 2U Rack (16 channel) chassis for managing at the same time.

With various Interface: SFP+ to RJ45, XFP to RJ45

 

FEATURE

  • Support Jumbo Frame

  • Transparent Transport and very low delay

  • Support ITUT prescribed DWDM/CWDM wavelength

  • Support DMI function for SFP+ / XFP fiber module

  • Support Loop-back test function

  • Economic In-band Management function

  • Powerful Network Management function(Web, SNMP, Console)

  • Support hot plugging

  • Support 2U Rack (16 channel) and standalone use

  • Full State Led display

  • Easy installation

  • UTP cable length detection(only RJ45 interface)

  • Provide reliable long-distance connection

  • Fast connection with multi-function

  • Small portable size case

  • Plug and play

 

10G_Ethernet_Media_Converter_BT-10GMC10G_Ethernet_Media_Converter_BT-10GMC_3

10G_Ethernet_Media_Converter_BT-10GMC-SFP10G_Ethernet_Media_Converter_BT-10GMC-XFP

 

Installing the Converter

For as a standalone unit:

→ Verify the DC adapter conforms to your country DC power requirement and insert the power plug

→ Connect the media cable for network connection

For as a slide-in unit:

→ The slide-in Media Converter and Converter Rack Chassis should supplied only from the same source, both Media Converter Rack Chassis are built to match each other at dimension, DC jack, DC receptacle and power safety.

→ Turn off the 19” converter rack power

→ Locate +12V DC power jack on converter back, carefully slide in and plug to 19” rack +12V DC power receptacle

→ Connect the media cable for network connection

→ Turn on the converter rack power, the Power LED will light up

 

Wire connection, Front and Side panel

 

10G_Ethernet_Media_Converter_BT-10GMC_110G_Ethernet_Media_Converter_BT-10GMC_2

 

Check List

Before you start installing the Converter, verify that the package contains the following:

---The TP-Fiber Converter

---AC to 12V DC Power Adapter (for external models) or Power Cord (for internal models)

---The User’s Manual

Please notify your local sales distributor immediately if any of the aforementioned items is missing or damaged.

Data Sheet

Model BT-10GMC

Module Card

Type A

Type B

Interface

Port A

SFP+

XFP

Port B

RJ45

RJ45

Transmission Speed

10G

10G

Data 

Technical Indexes

 

 

Protocols

IEEE802.3an(10Gbase-T),
IEEE802.3ae(10Gbase-SR/LR/ER/ZR)

Access Type

10G LAN

Transmission Distance

SFP+ module: Up to 80Km
10Gbase-T: 100m Cat cable

Maximum Packet Forwarding Rate

14,880,950/S

Network management

1. Card type information 
2. SFP+ or XFP fiber module detection                             
3. SFP+ or XFP fiber module DMI function (Temperature,Voltage,Optical power)
4. Link status detector
5. Enable/Disabled Loop-back test function
6. Enable/Disable PRBS Generator and checker function
7. Rate select (10Gbase Lan or Wan )
8. Remote card's status monitor (only in pairs)  

Power requirement Rack-mountable: AC85~220V / DC-48V
Standalone: AC220V / DC-48V
Power consumption: ≤9W
Work Environment Operating Temp: 0~50 ℃
Storage Temp: -10~70 ℃
Humidity: 5%~90% (non-condensing)
Dimension Card: 11.5(W)×78mm(D)
Standalone: 156(W)×128(D)×32mm(H)

 

LED Description

LED

Status

Description

PWR

On

Power is on and normal.

FX Link/Act

On

Connection status display for Fiber Link.
“ON” indicates that Fiber link is in correct connection.

Blink

Active status display of fiber link.
“Blink” indicates packet goes through FX end.

SD

On

Fiber signal is detected.

10G

On

Transfer rate of electric interface is 10Gbps.

Off

Rate of electric interface is 10Mbps.

TX Link

On

Connection status display for electric link.
“ON” indicates that electric link is in correct.

TX Act

Blink

Active Status display of fiber link
“Blink” indicates packet goes through TX end.

 

Order Model

10Gbps Media Converter BT-10GMC with SFP+ or XFP slot

Model

Feature

BT-10GMC-SFP+

Standalone SFP+ to UTP 10G Media Converter

BT-10GMC-XFP 

Standalone XFP  to UTP 10G Media Converter

Application

10G Ethernet Media Converter BT-10GMC

  • Connection between fiber to copper 10Gbps Ethernet equipment function as fiber-to-copper media converter for long distance transmission

  • Media converter for network backbone (SAN, LAN, MAN)

  • Can be applied in Telecommunication room, R&D laboratory, Data center, and etc.

  • Providing protections against lighting and static electricity for Ethernet network and the network main system

  • Providing additional network management options

Customer comment

Product News

No relevant news