1SFP and 1RJ45 Port SFP Media Converter BT-950SFP Series converter is an Ethernet media converter that converts media transmission between UTP Copper cables and fiber SFP (Small Form-Factor Pluggable) transceiver.
It is designed to meet the massive needs for Ethernet network deployment and able to extend a copper based network via fiber cable to a maximum distance up to 120km.
It can be installed into a Standard Converter Chassis.
The installation & operation procedures are simple & straight forward.
Operation status can be locally monitored through a set of Diagnostic LED located in the front panel.
FEATURE
10/100/1000Base-TX to 1000BASE-FX Converter
100Base-TX/FX or 1000Base-T to 1000BASE-SX/LX Converter
Standard: IEEE802.3 & IEE802.3u, IEEE 802.3z & 802.3ab
Interface: 1 x RJ-45 connector / 1 x SFP Slot
Plug-and-Play installation
Support Jumbo Frame (64-9216 Byte)
Support Voltage Monitor
Conversion between different transmission speeds and media types
Standalone type or card type, Can be installed into 2U 14/16 Slots chassis
Auto-negotiating Ethernet port (Half/Full Duplex)
Auto-crossover Ethernet port (Supports Auto MDI/MDI-X)
Easy Installation, Easy Trouble shooting
LED: Power , DUP,FP-LINK,RX,1000,TX
Dimension: 229x122x50mm (W x D x H) for packing, 94x70.6x26.5mm (W x D x H) for device
Item | Specification |
Item number | BT-950SFP series |
Standard Protocol | IEEE802.3u,10/100/1000Base-T,1000Base-SX/LX,IEEE802.3ah, IEEE802.3z/ab |
Flow control | IEEE802.3x port flow control and back pressure control |
Transmission speed | 10/100/1000M auto-negotiation |
Transmission mode | Full-duplex/semi duplex(auto-negotiation) |
Conversion mode | Storage transmission |
MAC address | VLAN 4K |
Buffer space | 128KB |
Packet length | Storage transmission:9728Bytes,straight-through,infinite. |
Time-delay | 9.6us |
Bit error rate | <1/1000000000 |
MTBF | 100,000 hours |
Power supply | Outside: 5V DC 1A ; Build-in: 110~265V AC 48V DC |
Power dissipation | <2.5W |
Interface | Electric port: RJ45,Fiber port:SC/FC or SFP |
Twisted-pair cable | Cat.5 UTP cable |
Multimode fiber | 50/125, 62.5/125um |
Single mode fiber | 9/125, 10/125um |
Wavelength | 850nm/1310nm/1550nm |
Transmit distance: - Dual fiber multimode - Dual fiber single mode - Single fiber single mode - Cat.5 twisted-pair |
550m 20/40/60/80/100/120Km 20/40/60/80Km 100m |
Operating temperature | 0~60℃ |
Storage temperature | -20~70℃ |
Humidity | 5%~90% (no condensation) |
Order Model
1SFP Slot and 1RJ45 Port SFP Fiber Media Converter
Part Number | Description |
BT-950SFP-FE | 1SFP+1RJ45,10/100Mbps |
BT-950SFP-GE | 1SFP+1RJ45,10/100/1000Mbps |
1SFP and 1RJ45 Port SFP Media Converter BT-950SFP
Extend your Ethernet connection up to 0~120km away using fiber optics.
Creates an economical Ethernet-fiber/copper-fiber link for connecting remote sub networks to larger fiber optic networks/backbones.
Converts Ethernet to fiber, fiber to copper/Ethernet, ensuring optimum network scalability for connecting two or more Ethernet network nodes (e.g. connecting two buildings on the same campus).
Designed to provide high-speed bandwidth for demanding large scale work groups that require expansion of Ethernet Network.
Bad industrial environment or high requirements for Lightning protection
Intelligent transportation supervisory system(ITS) and safe city
High-speed way supervisory/Tele-communication system, IP network camera
Security surveillance system for large corporations, multifunction network system
Long-distance multimedia schooling/ campus surveillance, long-distance broadcast television transmission system