RG59 P59HVVRM

Quad-Shield 95% Braid, 75 Ohm RG59

Key applications for WSE Legacy, Mini RG59 quad shield coax cable and connectors include broadband routers and switching equipment where immunity to conducted disturbances is required, but space is limited.

The quad-shield cable features a 100% bonded foil, 95% inner braid, 100% foil and 90% outer braid configuration. The conductor is solid 23 AWG copper. This cable is approved for use by Cisco on CMTS routers and exceeds the conducted RF immunity requirements of EN61000-4-6.

Electrical Specifications

• Impedance: 75 ± 1.5 ohms
• Nom. Inductance: .106 μH/ft
• Nom. Capacitance (Conductor to Shield): 16.3 pF/ft
• Nom. Velocity of Propagation: 83%
• Nom. Delay: 1.22 ns/ft
• Nom. Conductor Resistance at 20°C: 20.1 ohms/1000 ft
• Nom. Shield DC Resistance at 20°C: 3.5 ohms/1000 ft.
• Return Loss: 23 dB min., 5 - 850 MHz, 21 dB min., 851 - 3000 MHz
• Max. Operating Voltage: 300 Vrms (UL)
• Nominal Attenuation:

Physical Specifications

• Conductor: Solid copper
• Shielding: 100% bonded foil, 95% tinned copper inner braid, 100% foil, 90% tinned copper outer braid
• ULNEC/C(UL) CEC Type: CMR; CEC C(UL) rated CMG, FT-4
• Temperature Rating: -20° to +75° C
• Diameter over Dielectric: .102” nom.
• Dielectric Material: Gas Injected Foam High Density PE
• Maximum Pulling Tension: 36 lbs
• Minimum Bend Radius: 1.5”

 RG59 P59HVVRM

• RF signal transmission
• MATV, CATV, CCTV
• Digital video applications
• Drop in broadcast
• Satellite systems