simba

VN EN

Module Quang OPTONE SFP+-10GB-LR

Description

10Gbps SFP+ Optical Transceiver, 20km Reach
Producer

OPTONE
Price

Please Contact
Quantity

Purchase address

Module Quang OPTONE SFP+-10GB-LR

Description
Data Sheet
Application
Download (file PDF)
Customer comment

Add cart

Description
Data Sheet
Application
Download (file PDF)
Customer comment

Description

Module Quang OPTONE SFP+-10GB-LR

Product Description

The SFP+-10GB-LR series single mode transceiver is small form factor pluggable module for serial optical data communications such as IEEE 802.3ae 10GBASE-LR/LW. It is with the SFP+ 20-pin connector to allow hot plug capability.

This module is designed for single mode fiber and operates at a nominal wavelength of 1310nm. The transmitter section uses a 1310nm multiple quantum well DFB laser and is a class 1 laser compliant according to International Safety Standard IEC-60825.

The receiver section uses an integrated InGaAs detector preamplifier ( IDP ) mounted in an optical header and a limiting post-amplifier IC.

SFP-10gb-lr_2

Features

Operating data rate up to 11.1Gbps
1310nm DFB-LD Transmitter
Distance up to 20km
Single 3.3V Power supply and TTL Logic Interface
Duplex LC Connector Interface
Hot Pluggable
Power Dissipation < 1.0W
Compliant with IEEE 802.3ae 10GBASE-LR/LW
Compliant with MSA SFP+ Specification SFF-8431
Operating Case Temperature : 0^oC to + 70^oC (Standard) or -40^oC to + 85^oC (Industrial)

Applications

10GBASE-LR at 10.31Gbps
10GBASE-LW at 9.95Gbps
OBSAI rates 6.144 Gb/s, 3.072 Gb/s, 1.536 Gb/s, 0.768Gb/s
CPRI rates 9.830 Gb/s,7.373Gb/s,6.144 Gb/s, 4.915 Gb/s, 2.458 Gb/s,1.229 Gb/s, 0.614Gb/s
Other optical links

Data Sheet

Module Quang OPTONE SFP+-10GB-LR

Recommended Operating Conditions

Parameter		Symbol	Min	Typical	Max	Unit
Operating Case Temperature	Standard	Tc	0		+70	°C
Operating Case Temperature	Industria	Tc	-40		+85	°C
Power Supply Voltage		Vcc	3.15	3.3	3.45	V
Power Supply Current		Icc			300	mA
Surge Current		I Surge			+30	mA
Baud Rate					11.1	Gbps

Electrical Characteristics

Parameter	Symbol	Min	Typical	Max	Unit	Notes
Transmitter
CML Inputs(Differential)	Vin	150		1200	mVpp	AC coupled inputs
Input AC Common Mode Voltage		0		25	mV	RMS
Input Impedance (Differential)	Zin	85	100	115	ohm	Rin > 100 kohms @ DC
Differential Input S-parameter	SDD 11	-	-	-10	dB
Differential to Common Mode Conversion	SCD 11	-	-	-10	dB
Tx_DISABLE Input Voltage – High		2		3.45	V
Tx_DISABLE Input Voltage – Low		0		0.8	V
Tx_FAULT Output Voltage – High		2		Vcc+0.3	V	Io = 400µA; Host Vcc
Tx_FAULT Output Voltage – Low		0		0.5	V	Io = -4.0Ma
Receiver
CML Outputs (Differential)	Vout	350		700	mVpp	AC coupled outputs
Output AC Common Mode Voltage		0		15	mV	RMS
Output Impedance (Differential)	Zout	90	100	110	ohms
Differential Output S-parameter	SD22	-	-	-10	dB
Rx_LOS Output Voltage – High		2		Vcc+0.3	V	lo = 400µA; Host Vcc
Rx_LOS Output Voltage – Low		0		0.8	V	lo = -4.0Ma
MOD_DEF ( 0:2 )	VoH	2.5			V	With Serial ID
MOD_DEF ( 0:2 )	VoL	0		0.5	V	With Serial ID

Optical Characteristics

Parameter		Symbol	Min	Typical	Max	Unit
9µm Core Diameter SMF				10		km
Data Rate					11.1	Gbps
Transmitter
Centre Wavelength		λc	1270	1310	1355	nm
Spectral Width (-20dB)		∆λ			1	nm
Average Output Power*note1		Pout	-6		0.5	dBm
Extinction Ratio		ER	3.5			dB
Average Power of OFF Transmitter		Poff			-30	dBm
Side Mode Suppression Ratio		SMSR	30			dB
Transmitter Dispersion Penalty		TDP			3.2	dB
Input Differential Impedance		ZIN	90	100	110	Ω
TX Disable Assert Time		t_off			10	us
TX_DISABLE Negate Time		t_on			1	ms
TX_BISABLE time to start reset		t_reset	10			us
Time to initialize, include reset of TX_FAULT		t_init			300	ms
TX_FAULT from fault to assertion		t_fault			100	us
Total Jitter		TJ			0.28	UI(p-p)
Data Dependant Jitter		DDJ			0.1	UI(p-p)
Uncorrelated Jitter		UJ			0.023	RMS
Receiver
Centre Wavelength		λc	1260		1565	nm
Sensitivity*note2		Pmin			-14.4	dBm
Receiver Overload		PMAX	0.5			dBm
Optical Return Loss		ORL			-12	dB
LOS De-Assert		LOSD			-16	dBm
LOS Assert		LOSA	-28			dBm
LOS	High		2.0		Vcc+0.3	V
LOS	Low		0		0.8	B